By the CHC Remodel team in Kirkland, WA · Last updated: November 13, 2026
Quick Answer: Which Fence Is Best for a Seattle Home?
- Pressure-treated wood if budget comes first and you don’t mind regular staining.
- Cedar if you want a warm, natural Northwest look and can reseal it every 2 to 3 years.
- Vinyl if you want the least upkeep and can spend more up front.
In Seattle, a backyard fence can be up to 6 feet tall, and no building permit is needed for a fence 8 feet tall or less in total. Call 811 at least two business days before digging post holes.
Wood vs. Cedar vs. Vinyl: Side by Side
| Pressure-treated wood | Cedar | Vinyl | |
|---|---|---|---|
| Installed cost per foot in Seattle (Angi) | $20 to $34 | $25 to $50 | $25 to $65 |
| Upkeep | Stain or seal often to stop cracking | Seal every 2 to 3 years | Wash once a year |
| Rain and moss | Cracks and grays if not sealed | Resists rot, but needs to dry out | Won’t rot; moss can grow in shade |
| Look | Plain, can be painted or stained | Warm, natural wood | Clean, smooth, few colors |
| Repairs | Easy: swap a board | Easy: swap a board | Harder: often a whole panel |
| Best for | Tight budgets | Natural look | Low upkeep |

Pressure-Treated Wood Fencing
Pressure-treated pine or fir is the budget choice. It is strong and takes paint or stain well. Without regular sealing, it cracks, warps and turns gray in our wet weather. Let a new treated-wood fence dry for 4 to 8 weeks before you stain it.
Cedar Fencing
Western red cedar is a classic Seattle fence. It resists rot and insects naturally and looks warm and rich. It costs more than treated wood, it is softer and dents more easily, and it needs a clear sealer or semi-transparent stain every 2 to 3 years to keep its color.
Vinyl Fencing
Vinyl (PVC) never needs paint or stain and won’t rot. A yearly wash with soap and water keeps it clean. It costs the most up front, it can grow green moss or mildew in heavy shade, and one damaged section often means replacing a whole panel.

Other Fence Options
| Fence | Installed cost per foot in Seattle (Angi) | Good to know |
|---|---|---|
| Chain link | $15 to $30 | Lowest cost; little privacy |
| Aluminum | $27 to $80 | No rust; good for front yards and pools |
| Composite | $35 to $70 | Wood look with less upkeep |
How Seattle Rain and Moss Affect Your Fence
Most fence damage here starts where wood stays wet. A few simple steps help any fence last longer:
- Keep boards off the ground. Leave a small gap between the bottom of the fence and the soil.
- Use strong posts. Many Seattle fences mix cedar boards with pressure-treated posts. The posts take the ground moisture, and the cedar gives the look.
- Let it dry. Trim shrubs and vines away from the fence so air and sun can reach it.
- Wash it yearly to slow moss and algae, especially on the shady side.
Seattle Fence Height Rules and Permits
| Seattle rule | What it means for you |
|---|---|
| Fence height in yards | Up to 6 feet |
| Arbors, trellises and other decorative tops | Up to 2 more feet on top of the 6 |
| Front yard or street-side setback | Up to 4 feet |
| Sloping yard | Up to 8 feet at a post, if the average height between posts is 6 feet |
| Fence on a retaining wall that raises your yard | Wall plus fence up to 9 feet 6 inches total |
| Building permit | Not needed for a fence 8 feet tall or less in total; needed in flood-prone areas |
| Steep slopes, wetlands and other critical areas | Different rules apply; check with the City first |
Questions? Call Seattle SDCI at (206) 684-8600.
Outside seattle: Eastside cities have their own rules. For example, Bellevue needs no permit for fences 8 feet or less, while Bothell and Woodinville need no permit for fences 6 feet or less. We check your city’s rules before we build.

Before You Dig: Call 811 and Check Your Property Line
- Call 811 at least two business days before digging. Washington law requires anyone digging to call, so buried gas, power and water lines get marked.
- Find your property line. Look for the survey pins, or order a survey if you are not sure.
- Talk to your neighbor before building on or near a shared line, and agree on who pays and which side faces out.
How Much Does a Fence Cost in Seattle?
Angi puts the average Seattle fence job at about $3,851, with most jobs between $2,316 and $5,477. That works out to about $40 per foot on average.
Tall privacy fences, gates, sloping yards and removing an old fence push the price higher.
Example: 150 feet of 6-foot privacy fence with one walk gate
| Material | Installed price | 10-year upkeep | 10-year total |
|---|---|---|---|
| Pressure-treated wood | $6,000 to $8,500 | $1,500 to $2,500 | $7,500 to $11,000 |
| Cedar | $8,500 to $12,500 | $1,200 to $2,000 | $9,700 to $14,500 |
| Vinyl | $11,000 to $15,500 | $100 to $250 | $11,100 to $15,750 |
Over 10 years, the gap between materials gets smaller, because vinyl needs almost no upkeep.
How to Choose the Right Fence for Your Yard
- Set your budget, including upkeep, not just the install price.
- Be honest about upkeep. If you won’t stain every few years, look at vinyl or composite.
- Match your house. Cedar suits Craftsman and Northwest homes; clean lines suit modern homes.
- Check sun and shade. Shady, damp yards are hardest on wood and grow moss on vinyl.
Custom Fence Ideas for Seattle Homes
A fence does not have to be a plain wall of boards. Popular custom choices include horizontal slat fences for modern homes, board-on-board fences for full privacy, lattice or trellis tops for a softer look, and matching gates. We design and build fences to fit your house and your yard.
Frequently Asked Questions
Which fence material lasts longest in Seattle rain?
Vinyl lasts longest with the least work. A well-built cedar fence on strong posts also lasts a long time with regular sealing.
Is cedar better than pressure-treated wood?
Cedar looks better and resists rot naturally. Pressure-treated wood costs less. Many fences use both: cedar boards on treated posts.
Do I need a permit to build a fence in Seattle?
Not for a fence 8 feet tall or less in total. Height limits still apply: 6 feet in most yards and 4 feet in front or street-side setbacks. Flood-prone and critical areas have extra rules.
How do I keep moss off my fence?
Trim plants away from it, let in sun and air, and wash it once a year. Use mild soap and water on vinyl.
Can I mix cedar boards with treated posts?
Yes. It is a common and cost-effective design here.
How soon should I stain a new wood fence?
Let pressure-treated wood dry for 4 to 8 weeks first.
Do I have to call 811 before digging fence posts?
Yes. Washington law requires a call at least two business days before you dig.
About the CHC Remodel Team
CHC Remodel (Contemporary Home Construction, LLC) is based in Kirkland and builds decks, fences and outdoor projects across Seattle and the Eastside. Our CEO, Siamak Firooz, is a structural engineer. We are licensed, bonded and insured in Washington (CONTEHC837KA), and top-rated on Google with 4.9 stars from 85+ Google reviews.
Planning a New Fence in Seattle or the Eastside?
Tell us about your yard and get a clear, free estimate. See our deck and fence services.
Buttons: Get a Free Estimate (→ www.chcremodel.com/contact-us) · Call (425) 448-6680
Related guides: keep the links to the Seattle deck planning guide, retaining walls and pavers, and the contractor checklist.
Verified Credentials
WA L&I registration
CONTEHC837KA
★★★★★ 4.9 stars from 85+ Google reviews
250+ reviews across other directories
Contemporary Home Construction, LLC (CHC Remodel). Look us up with the same free state tool this checklist recommends.
Planning a Remodel?
Tell us about your project and we will walk through scope, structure and next steps.


